Plastic-containing materials as alternative reductants for base metal production

Shredder residue materials are produced after the removal of ferrous and non-ferrous fractions from end-of-life electronic equipment. Despite the high plastic content and metal value in the ash, high percentages of these materials are currently sent to landfills. In this study, the potential of utilising shredder residue material and other plastic-containing materials as reducing agents was studied. Plastic-containing materials were co-injected with coal into a zinc-fuming furnace in Boliden-Rönnskär smelter. The data obtained from the trial, such as the data from the chemical analysis of the slag and the steam production, are discussed. The observations indicate that plastic-containing material can replace up to 1?ton?h^?1 of coal without a significant decrease in the zinc reduction rate.     

物质平衡-拟压力近似条件法确定气藏储量

物质平衡法作为一种有效的手段被广泛应用于气藏储量或井控储量的确定。为简便准确地确定气藏储量，笔者从物质平衡原理出发导出了"物质平衡条件"，求解气体渗流数学模型，得到了"拟压力近似条件"。将二者结合，提出了"物质平衡-拟压力近似条件法"（MB-QAC方法）。利用该方法，通过边界控制流阶段（产量波动相较于边界作用可忽略）的生产数据便可准确地计算气藏储量。定产量、定流压以及复杂生产计划条件下的数值模拟数据以及气藏实例验证了其有效性。在生产数据记录可靠的条件下，储量计算误差一般小于5%。同时，数值模拟结果表明，动态物质平衡方程是一种近似关系，拟压力近似条件对于模拟的各种情形均成立。由于考虑了岩石和束缚水的压缩性、气井产量的波动和气体性质的变化，MB-QAC方法具有一定的理论基础，对于异常高压和正常压力系统的气藏均适用，但不适用于水体活跃的气藏。     

密集颗粒流动的连续性方法应用研究

颗粒流动广泛存在于自然现象和工程应用中，无论是山体坍塌还是工程上球床模块式高温气冷堆和中国科学院近代物理研究所提出的新型流态固体颗粒靶概念。本文基于适用于处理大变形问题的物质点法（MPM），采用μ(I)流变模型，实现了用连续性方法模拟密集颗粒流动的计算框架，并模拟了颗粒坍塌实验和漏斗流动现象，数值模拟结果与实验结果、DEM计算结果均吻合较好。本文采用的连续性本构和MPM能有效模拟密集颗粒流动。可在本文探究的连续性方法模拟密集颗粒流动的框架基础上，完善边界条件和本构模型，为用连续性方法处理大量颗粒的工程问题提供借鉴。     

Stress analysis of nano porous material using computed tomography images

Sintered silver materials possess an advantage that allows excellent bonding between chips and their substrate. Stress manifests as the materials resistance against external and internal forces, however during stress analysis the complex physical behavior caused by the forces and the nature of the material is often disregarded by researchers. This paper analyses the stress behavior of nano porous sintered silver in X and Y directions using finite element modelling. This study also focuses on observing the growth of the crack in samples in different directions. It is found that the occurrence of the cracks in the specimens starts at the peak stress point and the failure is observed at the largest void. It is also detected that the stress across the whole area of the model is regularly distributed in those samples which have relatively smaller voids. Thus, these samples have a better material integrity. In addition, this fact indicates that the material in these sample could hold higher levels of stress. Finally, the level of the stress and the possibility of failure in those samples that have smaller voids is found to be less than others.     

单组份聚氨酯炮孔填塞剂应用性试验

炮孔填塞是爆破施工过程中的一个关键环节,也是践行精细爆破设计理论的重要措施。传统的炮泥填塞存在着诸多不足,为此,研制了以聚氨酯为基材的TK炮孔填塞剂,通过大量基础性能研究和隧道现场工业性试验,论证了其作为炮孔填塞材料可降低炸药单耗,提高单循环进尺和炮孔利用率,减小空气冲击波、爆破噪声等有害效应的影响,且是安全可靠的。TK炮孔填塞剂优良的填塞效果、方便快捷的施工方法及显著的经济效益,方便于在爆破工程中推广应用。     

Conductive adhesive with transient liquid‐phase sintering technology for high‐power device applications

A highly reliable conductive adhesive obtained by transient liquid‐phase sintering (TLPS) technologies is studied for use in high‐power device packaging. TLPS involves the low‐temperature reaction of a low‐melting metal or alloy with a high‐melting metal or alloy to form a reacted metal matrix. For a TLPS material (consisting of Ag‐coated Cu, a Sn96.5‐Ag3.0‐Cu0.5 solder, and a volatile fluxing resin) used herein, the melting temperature of the metal matrix exceeds the bonding temperature. After bonding of the TLPS material, a unique melting peak of TLPS is observed at 356 °C, consistent with the transient behavior of Ag₃Sn + Cu₆Sn₅ → liquid + Cu₃Sn reported by the National Institute of Standards and Technology. The TLPS material shows superior thermal conductivity as compared with other commercially available Ag pastes under the same specimen preparation conditions. In conclusion, the TLPS material can be a promising candidate for a highly reliable conductive adhesive in power device packaging because remelting of the SAC305 solder, which is widely used in conventional power modules, is not observed.     

磁铁尾矿与石灰石双掺生产优质水泥

受环保压力影响，西乡公司生产水泥用河道淤沙供应紧张，难以满足生产需求且价格上涨幅度较大，严重影响到水泥生产及成本，我们开展了磁铁尾矿在水泥中的应用研究工作，通过连续几个月的生产实践，对物料配比优化，磨机技术改造，实现利用磁铁尾矿与石灰石双掺解决混合材紧缺问题，降低了水泥生产成本，水泥质量及性能稳定。     

Nisin as a Food Preservative: Part 1: Physicochemical Properties,Antimicrobial Activity,and Main Uses

Nisin is a natural preservative for many food products. This bacteriocin is mainly used in dairy and meat products. Nisin inhibits pathogenic food borne bacteria such as Listeria monocytogenes and many other Gram-positive food spoilage microorganisms. Nisin can be used alone or in combination with other preservatives or also with several physical treatments. This paper reviews physicochemical and biological properties of nisin, the main factors affecting its antimicrobial effectiveness, and its food applications as an additive directly incorporated into food matrices.     

Microbial Diversity of Ground Beef Products in South Korean Retail Market Analyzed by PCR-DGGE and 454 Pyrosequencing

The purpose of this study was to assess the microbial community in ground beef purchased from local stores in the north central area of South Korea. A total of 31 ground beef samples showed 3.77 ± 5.16 × 10⁵ CFU/g on aerobic plate counts, and PCR-based denaturing gradient gel electrophoresis was performed to assess the microbial community, which revealed a diverse profile among the products. Four of these samples were selected for further analyses via 454 pyrosequencing. Pseudomonas was the most frequently identified genus in terms of relative abundance (4.54–73.8%), and other bacteria such as Lactobacillus, Acinetobacter, and Carnobacterium were also identified in the ground beef. The presence of bacteria can affect the spoilage of ground beef products depending on the microbial populations, and understanding these populations may help limit spoilage and/or foodborne illness. This study illustrates the microbial diversity occurring among Korean ground beef products, even within a local region, and provides a molecular approach for potential ground beef microbial quality assessment.